ALL METAL: all metal mode
BLACK SAND:
“Black Sand”. This system is equipped on certain range of the detector with
function you can switch from one search “Norm” (normal) to research
“Black sand” allowing the detector to work on soils heavily
mineralized edges of beach, wet sand or black sand.
BOOSTER: Decomposition Systems Electronic boost to increase the power of
detector when soil conditions permit “excessive mineralization
ground “and without outside interference.
Bottlecap REJECT: Setting the discrimination of bottle caps with
rejection.
DISCRIMINATION:
Discrimination enables the selective detection and allows a stepwise
Elimination of all ferrous metals during the search (iron, steel, nails,
capsules …). Thus the detector will search that targets non-ferrous metals.
With discrimination too high on a metal detector parts
precious jewels of small sizes
discrimination using carefully so as not to miss
small objects of interest. It takes about 30% less performance
using a discrimination elevate the unit. mode “all metal” is
the mode is best in most surveys.
DISK DETECTION OR COIL:
Inside is a coil that allows the reception of signals to
the device during scanning the surfaces to explore. Its size is typically
20 centimeters in diameter but the disks are interchangeable so
to target research (small disks for greater precision and large disks
for more depth). Disk “GP” means disk “Great Depth”.
EFFECTS OF SOIL:
Ground effects are interference caused by different types of
ground because of their compositions. They generate false signals affecting the
recherche.Un mineralized soil when it contains oxides form a screen
opaque disturbing wave transmission. The next-generation devices are
Now equipped with ground effects trim to eliminate these genes
interference. The best setting to mitigate the effects of soil is noted for
perfect stability both in the air that approaches the ground with the disc. This
setting must be changed regularly as and when traveling to
to make the best performance. These settings can be automated
(Performed by a microprocessor based on the analysis of the received signal) or manual
(Potentiometer, the remaining meillleur current system).
FREQUENCY:
Frequency of the detector (may vary from about 3 kHz to 20 kHz according to
devices). The detectors used mainly by prospectors are
detectors at low frequency (VLF). The company White’s example was built with
success of devices operating on a frequency of 6.6 kHz providing both
good sensitivity and good discrimination of any environment.
GROUND BALANCE: (GEB)
Compensator ground effects, electronic balancing for the neutralization of
effects of mineralization, wet, black sand (black sand).
HOT ROCK REJECT: Degree of rejection of volcanic stones, stones strongly
mineral composed of metal particles causing false signals.
IB-TR: induction – transceiver): reliable and accurate sensors, working
low and high frequency.
PULSED INDUCTION: Sensors displaying high-level performance of
insensitive to the depth and ground effects.
LEARN ACCEPT “NOTCH”: Acquisition of targets has to be accepted for
LEARN REJECT “NOTCH”: Acquisition of a target for rejection
DYNAMIC MODE “MOTION”: How the detector which requires a scan
consistent with the disk detection.
STATIC MODE “NO MOTION”: How the detector for a research
without having to quickly scan the disk detection “slow scan”.
SEARCH MODE:
MODE “All Metal” or “All metal” Enhanced performance in the detector depth
retrieve all objects of ferrous and non ferrous meteorites very popular with
collectors minerals or highly mineralized rock.
Mode “Discrimination”: Allows discrimination for selective detection of
metals by removing all ferrous metals during the search (iron, steel, nails,
capsules … being part of the iron). The unit will then search for the objects
metals (gold, silver, copper … being part of the non-ferrous)
on paragraph, please also DISCRIMINATION.
NOTCH: Discrimination to target a search to one type of metal
specific and rejected all other metals except one who was previously aurra
select or desired by the user in that the detector records the target memory
select the type of metal. Example: on a beach you select a type of
metals “gold” you save with the notch in the memory of the detector at
Your search for gold from beneath the disk, locate the detector while gold
select and will reject all other targets even coins or other
metal that has not been previously save it on the internal memory of the detector).
This type of research is more or less interesting in very specific searches.
Re-tuning or RETUNE: the user by activating this function returns the
initial adjustment of the threshold sound carried out at the start of the detector.
RETUNE: Recalibrating the sound threshold (Threshold), the user by operating the
function restores the initial setting of the threshold noise, storing the user to
the start of the detector.
Pinpointing: Allows precise localization of the target location is in fashion
static forming a cross.
SENSITIVITY:
The sensitivity is the adjustment of the device power level in order to eliminate
noise such questions crackling or spitting. These signals annoying
are caused by different types of soil.
SENSITIVITY or Sensibility: Sensitivity of detection power (more power makes
the unstable detector) is the sensitivity adjustment device to eliminate
noise such questions crackling or spitting. These signals annoying
are caused by different types of soil.
SOUND THRESHOLD (Threshold) (constant hum of noise threshold) by setting
potentiometer or the touch of a button with a menu system. Provides better performance of the detector, by applying a slight threshold sound barely audible. If the threshold level is too raise the detector will be more powerful in depth, but some will be more noticeable against the ground mineralization and therefore will be more unstable, not too mineralized ground on the “noise threshold” can be increased to increase the detector performance.
SIGNAL BALANCE:
This feature allows using a potentiometer to balance the sound level received by
the balancing disk of this signal, it is an improvement of the sensibility of
the device. The depth of research will be optimized and more accurate.
SILENCE SEARCH: Research silent.
THRESHOLD: threshold noise (constant hum of noise threshold).
TONE ID: discrimination by sound.
VLF:
Acronym to differentiate metal detectors as they work.
There are 4 families of metal detectors: BFO, IB-TR, VLF and PI (Pulse Induction).
VLF (Very Low Frequency) (or as TR or IB): detectors working at very low
frequency, which allows to optimize the discrimination and thereby facilitated the identification of
targets detected by the user. Detectors working at high frequencies is
higher power level in-depth research but have gaps
at the discrimination.
VCO: Voltage Controller Oscillator audio response by more noticeable
on deep targets.
