Sea Hunter Mark II metal detector

Sea Hunter Mark II metal detector In the category Garrett Metal Detectors videos more articles and learn more information about Sea Hunter Mark II metal detector Reviews Price Specifications Features Image manuals videos Accessories All this in metal detectors for gold.

Sea Hunter Mark II metal detector has two modes, the detuning from metallic debris: standard and special. These modes switch combined with power control (Power Control) and is located in the lower right corner of the Panel of the detector.

Search mode, which usually operate traditional pulse induction (PI) metal detectors. In this mode, the background sound signal permanent and remain within the specified operator. Small changes in the level of the audio signal are the norm. Small or deeply located objects cause weak and barely audible signal; large or shallow located facilities provide clear and loud sound signals. The regulator exception (Elimination Control) by turning clockwise reduces the sensitivity of the detector to trace metals. Weakly conductive objects, such as foil, nickel and pull tabs from cans caps are excluded from detection, because they are much lower on the scale than good conductive objects, such as coins and most of the jewelry. Weakly conductive objects can be easily rebuilt, but the little beep, if these items are close to the search coil. Jewels are typically located in the middle part of the range of conductivity, so it is important to use the degree of detuning only to the extent absolutely necessary. Standard mode the detuning allows you to search with a very low scanning speed, which makes it especially effective for determining the exact location of the objects. This mode also provides the greatest possible depth of detection and is very effective in areas with a small cluster.

This search mode is different from the standard that provides a more accurate and broader recognition of detected objects. Background audio signal remains at the selected level, while the “adopted” object is in front of the search coil. At this point there will be a clear sound signal characteristic for all metal detectors. How and when working in standard mode, tuning out regulator is used to change the detector’s ability to detect different types of metals, weakly conductive objects can be excluded from the range of detection, with the ability to detect the more important goals of good conductive metals will drop slightly. Special regime showed smaller depth detection in tests on land, but its ability to clearly exclude unwanted items.

negative impact on sensitivity to fit objects in certain situations enables him to win compared to standard mode. For example, if the regulator is set to exclude the detuning reeds caps from metal cans, this tweak is ineffective or useless to detect the majority of thin gold rings. To determine the exact location of the object when running in a special mode spend the search coil over the target. The search coil should be in motion, was to beep. This mode is designed to provide superior pulse inductive discrimination targets, and is especially useful in areas containing large amounts.

you can buy Garrett Sea Hunter Mark II at the best price.

Common names: metal detector Garrett AAI Hunter Mark 2, Gareth SI Hunter Mark 2, Mark Hunter 2, SI Hunter Mark 2, SI Garrett Hunter Mark 2.