The “DSP” inside our SPECTRA system does everything: it conducts millions automatic corrections to the output frequency, depending on the program and selected metal and produces an accurate signal to 0.1 Hz. The result? Only the chosen metal is stimulated and without defect.
SPECTRA gold detector metal detectors for gold
Digital Frequency synthesis:
Scanner for gold, silver, copper, bronze, iron, lead, aluminium, diamonds, water, vacuum, and others.
The frequency is adjustable by the user to 1 Hz…
Ground digital scale (the ground effects settings):
Analyses the conditions of soil automatically and allows you to view the waveform appropriate to avoid false readings due to mineralization and magnetic fields.
Automatic operation in contact with the soil – APO:
The SPECTRA is not from “button ON. This allows a permanent of the State of the ground control, and is automatically in the right conditions , to absorb the signal. The SPECTRA does not need probes, cables, filters, external battery: it’s an easy-to-handle compact design. It detects in all directions. The signal transmits 360-degree RADIUS, the user is not limited to one direction.
The “GROUND BALANCE” (ground effects) function: the SPECTRA analysis both the mineral content of the soil and the moisture level, the result appears as an identification number in the value of the land, on a scale from 00 to 99.Ce identification number informs the user about the type of soil to be analyzed.
Long detectors worn currently offered on the market, are nothing else that frequency generators, simple construction that are not suitable for terrestrial use. Soils have varying combinations depending on moisture and minerals. The operation of frequency generators signal will be transmitted s in a conductive floor, but not will any loose soil or mineralized soils. AND the user will receive false indications of the targets or even will give no indication!
The DGB (Digital Ground Balancing) function, was developed for the SPECTRA in order to assist it in the indication of the targets reliable, maintain the maximum amplitude of the signal and guaranteed stable operation regardless of the soil type.Still, the ‘SPECTRA Track‘ system full balancing the floor with precision, choosing variable waveforms on the emission frequency according to the ground.
DFS (Digital Frequency Synthesis) System.
The SPECTRA is the only detector at long range on the market with output handle by a DSP microprocessor, which allows it to be t fast enough to run 40 million instructions per second, and execution of the corrections of the frequencies accurately and automatically.
Each metal has its own specific molecular frequency, far long range detectors have been unable to maintain frequency signal molecular stable enough to make it visible to the desired target, false signal and the ‘ghost’ targets were practical routine and due to mineralization, solar storms and magnetic fields.
Select the type of metal you are looking for, and a counter informs you when the RAYFINDER signal has developed enough energy by report field met to start the scan of the target. When the counter stops the electromagnetic field is strong enough and the “START scanning” message warns the operator so that it can begin scanning the target. All other metal objects in the area are removed, and the desired element absorbs sufficient energy to become visible.
Examples of selections of automatic signals due to different soil conditions
«Whatever the distance and the type of soil, the SPECTRA can fit»
SPECTRA gold detector
Power supply module: the aim of this unit is to feed the antenna rods. Thus, the system is not auto-potential. By increasing the conductivity of the user, the power module allows everyone to succeed his research.The power Module has a new (COE) weight control;The power supply module can determine the weight of a target once it is located. The weight control is controlled by a rotary knob on the power module.Set on a low amplification, and only the large quantity (in kilograms) will be detected. Select a strong amplification and only small amounts of grams are also detected.
The stems must remained stable and balanced at waist height, and slightly in front of the operator. They are kept pointing in one direction, forward, parallel one to the other, and at a distance of 20 to 45 cm. Rods rotate from left to right to indicate the direction of the target and intersect when you are above target.
The stems are fed by the power supply module, they are 45 cm long and are plated with a special layer of gold do not suffer from the oxidation of human skin (PH).The purpose of these rods is to indicate to the operator that he faces the power between the target and the RAYFINDER line.
SPECTRA gold detector
SPECTRA gold detector In the category Metal Detectors more articles and learn more information about SPECTRA gold detector Reviews Price Specifications Features Image manuals videos Accessories All this in metal detectors for gold.
Tags: SPECTRA
Comments
Post a Comment