Scanmaster 1550 us so deep underground metal detector

Scanmaster 1550 us so deep underground metal detector In the category Metal Detectors more articles and learn more information about Scanmaster 1550 us so deep underground metal detector Reviews Price Specifications Features Image manuals videos Accessories All this in metal detectors for gold.

Scanmaster 1550 us so deep underground metal detector

SCANMASTER-this is the most important component of the scanner. Design a simple, yet powerful. Battery 12 volt rechargeable DC. Battery voltage by the device continuously monitors circuit scanner. When low voltage display performance frequency is not stable. And under normal conditions the battery can be used continuously for 18 hours. A battery equipped SCANMASTER through small cargo. Connect the charger and the battery, note the polarity. Reverse polarity causes damage to the battery charger and/or shorten battery life (3-5 years). Please note that the scanner is connected to the power supply and battery, you should pay attention to polarity! If reverse polarity and will burn the valves, and this time, we must replace the valves! The valves must be followed exactly the same as the original! The correct size is 1-amp-120/250 Volt 3AG slow fuse. Also has large damage fuse SCANMASTER, in this case, the lifetime warranty will be void!

Force sensor-element is responsible for two of the brass Rails in the ground by examining the specific reference to the ground. Power cable coaxial cable, connect the output SCANMASTER.
Power unit-this device is designed for the power Rod antenna. The device contains 9 volt DC battery. In the upper part of the “pay” button to view the status of the battery. If lit up for lights, battery healthy. If there is a dim light or bright light, you need to replace the battery. To replace the 9 volt battery, you only need to rotate the cover down, open the module. Rod antenna socket on the power unit, power unit open. When not in use, attach the antenna rods from power! If the antenna rod inserted into the power unit, keeping it will cause the battery (9 volt). When you call functional units, and avoid contact with each other so that the rod antenna, because it can cause battery short circuit.
Rod antenna-the antenna rod with the support of the power unit. Rod antenna is designed for the player that he/she entered the power shift between the sensor and the target line. Under normal circumstances, holding the rod antenna to achieve stability and balance, high waist, slightly in front of the operator. Hand-held Rod antenna, the antenna signal to the bar front, parallel to each other and separated by 8-18 inches away. Everyone needs to find the best fit for them. It takes trial and error to find. Remember, the device, and a quiet relaxed people who will do better than the rigid tension! When you enter a radio frequency power line, antenna Rod through naturally. At the first intersection, you see the dawn of victory, will once again welcome in the intersection.
Collector-this is four devices, use the passive integrator for assistance in locating the object. They are “passive” because it doesn’t require energy, just to get an initial indication of the scanner, and then move to the goal. In the beginning, the first major installations of triangulation measurement goals. Once you find all over the target area, select the device with the second goal.
First installation
On the navigation panel front, and coaxial cable for the power sensor SCANMASTER. Insert carefully in Earth remote sensing pin, so the sensor to keep my head. Then, check the front panel to the predetermined position, and confirm connectivity and location. Saturated in the Earth press “power on” button, print on front, frequency select the frequency you want, from the power amp (power amplifier), “to keep the handles 3-4 minutes. If the scanner in any aim, aim gradually to absorb the signal from the scanner.
Process
You will be fully underground signs, the size and depth depend on the goal. Near a small goal is often vague or distant goals. The normal target depth of 5 feet. The goal will be deeper and further. Hidden objects such as mines or big goals, from several miles to see. The depth of the exact distance depends on several factors, including the size of the target, the target length of time in the field, conductivity (electrolytic ion, etc.), the ability of the player (depending on the efficiency of equipment) and other small factors.
It all started a hand holding a rod antenna, standing 10 feet away from power and circular sensor on the sensor. Rod antenna should be placed at waist height, and parallel to each other, and point to the front, advanced less than a thumb trigger, to maintain balance. It will take time for exercise, once mastered, will become very common. Flying around the sensor, and normal walking, walking instead of walking, and maintain the sensor to maintain a fixed distance. Assuming the scanner operating range to the target, when your feet start on power lines, under normal circumstances, the antenna Rod attract each other. Under normal circumstances, the energy introduced the goal line one is 12 inches.
Once a power line, the next step is to measure the purpose of triangulation. Measuring the power side line is a set of 15 feet, and then the other side of the power line set at 15 feet of collector II
Examples).