pulse induction metal detectors STINGER 2
“PI (pulse induction) metal detectors”
STINGER 2 pulse metal detector with LCD display, digital and graphical representation of signal level and the parameters of the discrimination and the working arrangements, as well as the condition and temperature of the rechargeable battery.
Full microprocessor control ensures stable operation in all conditions.
2 types of automatic balance to the parameters of the soil-remember and eliminate signal from soil or through constant adaptation to changing signal within certain limits.
Two ID properties of the found indications of metal-colour (purity of the metal) .
The VCO mode for accurate localization of the found object.
8 modes of discrimination-NORMAL DISCR. -for normal soil and 7 AUTO mode, DISCR. to remember or to eliminate signals from certain objects or soils with high mineralization.
The opportunity to remember and completely eliminating the highly mineralized soil.
Opportunity for total exclusion of unwanted objects.
The ability to remember a particular type of metal and only search it with the exclusion of all other metals.
The opportunity for successful registration of non-ferrous metals under active ceramics and orudeni stones or between iron objects.
A choice between 8 search speeds: 4 dynamic (movement) and 4 static-for precise localization of the site.
Choice of 2 types of audible indication-VCO (of dual tone multifrequency) or means of indication-low tone for magnetic and non-magnetic high tone (nonferrous metals).
2 types of indication of discrimination-digital or graphic form
Indication (in minutes) for the time remaining to the exhaustion of the battery.
STINGER 2 test
httpv://www.youtube.com/watch?v=cjhzdM35LfM
Regulation of broadcast power pulses.
7 degrees of illumination of the display
4 programs to work with 4 different seeking probes.
Compensate for the influence of the Earth’s magnetic field.
Eliminate outside interference during operation.
The opportunity to work in rooms and near electrical networks-50 Hz suppression of interference.
Complete lack of dupkov effect of all kinds of soils.
Built-in rechargeable battery 18V/2200 mh Li-ion, providing 8-12 hours of continuous use, depending on the selected power and the type of the used probe. It is possible to include an external power unit (VZB), which is worn on the waist or bag, is also a battery and charge from the charger. The time to work with him is about 40-60 hours!
Track capacity of a rechargeable battery during operation and automatic alarm and shutdown upon reaching the critical minimum.
Automatic battery charge-capacity measurement and tracking the temperature at the time of the charge.
The ability to set up over 40 working and service parameters provide a convenient and effective work in the most diverse conditions of search.
Quick and easy access to all the settings in the menu.
All these features allow the STINGER 2 works excellently in all earthly conditions, equally effective in normal and in highly mineralized and polluted areas.
STINGER 2 can work with seeking probes: elliptic 22 x 32 sm., round 36 sm. and 1x1m frames. or 2x2m., and also with 30×5 cm. cylindrical search coil with 10 m. cable for descent into the wells, holes and openings, such as the maximum depth of detection with her is up to 1 m.
Depths of detection with frame 1x1m:
-metallic object with dimensions of 10 x 10 cm.———-170 cm.
-25 x 25. ———————————————- 230 см.
– 50 х 50см.———————————————– 280 см.
-1 x 1 m. ————————————————– 3,8 м.
-maximum depth for large object——up to 5 m.
For the detection of metal objects at a greater depth can be used frame 2×2 m. With her depths increase with about 20-40% (according to the size of the subject), while the maximum depth is 6 m.
STINGER Kit 2 includes: protective case with electronic control unit looking for a framework 1×1 m, charger for 220 V and 12 V battery charger.
